- KeylessOption Fully tested complete replacement keyless entry remote key fob with will electronics already installed
- Compatible with: EZSDEI474V, 473V -For Viper, Dei, Automate, Valet, Avital, Clifford, Python Aftermarket Alarm remote starter systems
- Please make sure original remote has same FCC ID EZSDEI474V - Please check owners manual or manufactorers website for DIY Step-by-Step programming instructions
- Replacement 1-Way 3-Button remote compatible with the following remotes 470T, 471T, 474V, 475Q, 475T, 476V, 487V, 488V, 489V, 4171V, 7541V
- This is a replacement part to match the original in form and function
KeylessOption is a quick, easy and affordable way to replace your keyless entry remote control car key fob. This is a replacement remote for an aftermarket alarm / remote start system. Plase make sure FCC ID from original remote matches EZSDEI474V. Programming instructions may very please check owners manual or manufactorers website
Programming Instructions will require accessing valet/programming switch
1) Open a door and make sure the dome light is on.
2) Turn the ignition on to the RUN position or start the car.
3) Within 15 seconds press and release the Valet/Program push button 1 time for vehicles with remote start or 7 times for vehicles without remote start. Then press once more and hold the valet/ program switch down. You will get a confirmation chirp by either the flashing parking lights, or the horn honk or both
4) Press the lock button on the transmitter. A chirp or horn-honk will confirm that the code has been learned.
5) Once the code is learned, the Valet/Program push button can be released.
6) Turn car off and test.
